Request a Quote on Protectors And Insulators Products Like 3M Part Number 80611264104 Now!

Mfg Part Number : 80611264104

Manufacturer : 3M

Main Category : Wire And Cable

Category : Protectors And Insulators

Sub Category : Qsiii And Qs-2000 Splices

Description : The 3m™ Cold Shrink Splice Kit Qs-Iii Series 5545a Is Designed To Splice 46kv Solid Dielectric Power Cable. Qualified To Ieee Stn. 404, Kits Fit Tape Shield, Unishield®, Wire Shield And Lc Cables With A Conductor Range Of 4/0 To 1000 Kcmil (120 - 500 Mm²) . Designed And Tested For Applications On Type Mv-90 Or Type Mv-105 Copper Or Aluminum Conductors. Cold Shrink Splice Body Is A One-Piece Molded Design Made Of Specially Formulated Silicone Rubbers, While The Cold Shrink Jacket Is Made Of Epdm Rubber For Physical Protection. Each Splice Manufactured Is Factory Tested For Heightened Reliability.

ElectroMech Purchasing is a premier procurement platform for those seeking reliable parts, our website’s vast inventory featuring over 2 billion new, used, obsolete, and hard-to-find items that are readily available at any time. You are currently on the RFQ form for part number 80611264104, a 3M item listed with the description “The 3m™ Cold Shrink Splice Kit Qs-Iii Series 5545a Is Designed To Splice 46kv Solid Dielectric Power Cable. Qualified To Ieee Stn. 404, Kits Fit Tape Shield, Unishield®, Wire Shield And Lc Cables With A Conductor Range Of 4/0 To 1000 Kcmil (120 - 500 Mm²) . Designed And Tested For Applications On Type Mv-90 Or Type Mv-105 Copper Or Aluminum Conductors. Cold Shrink Splice Body Is A One-Piece Molded Design Made Of Specially Formulated Silicone Rubbers, While The Cold Shrink Jacket Is Made Of Epdm Rubber For Physical Protection. Each Splice Manufactured Is Factory Tested For Heightened Reliability.” If part number 80611264104 is of interest to you, be sure to use our online RFQ service to request a quote, and we guarantee you will receive a response within 15 minutes upon our receipt and review of a completed form.

Note : We Will Not Share Your Information With Any Third Parties.

Product Details

“*” Required Fields are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Here at ElectroMech Purchasing, we take pride in offering some of the best Protectors And Insulators products on the market, doing all within our power to meet and exceed industry standards for quality control and export compliance. More than that, we rigorously follow a NO CHINA SOURCING pledge, further guaranteeing the authenticity and reliability of our The 3m™ Cold Shrink Splice Kit Qs-Iii Series 5545a Is Designed To Splice 46kv Solid Dielectric Power Cable. Qualified To Ieee Stn. 404, Kits Fit Tape Shield, Unishield®, Wire Shield And Lc Cables With A Conductor Range Of 4/0 To 1000 Kcmil (120 - 500 Mm²) . Designed And Tested For Applications On Type Mv-90 Or Type Mv-105 Copper Or Aluminum Conductors. Cold Shrink Splice Body Is A One-Piece Molded Design Made Of Specially Formulated Silicone Rubbers, While The Cold Shrink Jacket Is Made Of Epdm Rubber For Physical Protection. Each Splice Manufactured Is Factory Tested For Heightened Reliability. items. If you happen to be facing a time constraint where you require electromechanical parts quickly, rest assured that we can offer expedited shipping options based on availability. Bearing this in mind, kick off procurement for part number 80611264104 and other 3M products today.

Related Electromechanical Components of 80611264104

806
Terminal Strips
Keystone Electronics

806-0206-01-00-00
Cambion

806-0431-500
Other

806-0432-500
Other

806-1032-03-00-00
Cambion

806-1036-03-00-00
Cambion

806-104
Wago

806-144
Zierick

806-163-50
Other

A Complete Electromechanical Parts Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification

	Guaranteed on-time delivery
	Over 5100 manufacturers
	Customized and user-friendly database
	Competitive Prices
	Scheduling Flexibility
	Complete purchasing solutions